4 - 18 MC9190-G User Guide
5. Tap Start > Internet Explorer.
6. In the address field, enter an internet address and tap the Enter button. The web page loads.
Dial-Up Networking Services
Dial-up networking allows the user to connect the MC9190-G to a Bluetooth Phone and use the Bluetooth Phone
as a modem to connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password
and domain name, if required) for the office network or ISP.
To create a new Bluetooth connection:
1. Ensure the Bluetooth Phone is discoverable and connectable.
2. Ensure that the Dial-Up Networking profile is enabled on the MC9190-G. See Profiles Tab on page 4-31 for
more information.
3. Tap Menu > New Connection.
4. Select Explore Services on Remote Device or another from the drop-down list and tap Next.
5. BTExplorer searches for Bluetooth devices in the area.
The discovered devices display in the Select Remote Device window.
6. Select the Bluetooth Phone from the list and tap Next. The MC9190-G searches for services on the Bluetooth
Phone.
Figure 4-10
Select Remote Service Window
7. Select Dial-up Networking Gateway service from the list and tap Next.
8. In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.
9. Tap Next.
10. Tap Connect.
11. Select the entry and tap OK. The MC9190-G begins to communicate with the Bluetooth phone. If required, the
phone requests permission to communicate with the MC9190-G.
NOTE Network Access profile is not supported.
To Next Page
Loading...
Need help?
General
