Using Bluetooth 4 - 25
Figure 4-18
Remote Service Connection Window
4. In the Service Type drop-down list, select Active Sync.
5. Tap OK. The MC9190-G connects the PC and an ActiveSync session begins.
6. Tap Finish.
7. To end the session, tap the ActiveSync icon in the Favorite window and select Disconnect from the pop-up
window.
Personal Area Network Services
NOTE This profile supports Ad-hoc and PAN User. Network Access Profile is not supported.
Connect two or more Bluetooth devices to share files, collaborate, or play multi-player games. To establish a
Personal Area Network connection:
1. Ensure that the Personal Area Networking profile is enabled on the MC9190-G. See Profiles Tab on page
4-31 for more information.
2. Use the Connection Wizard to search for a Bluetooth device.
3. Select the device and tap Next.
4. Tap Next.
5. Tap Connect. The MC9190-G connects to the Bluetooth device.
A2DP/AVRCP Services
A2DP/AVRCP is used to connect to a high-quality stereo headset:
1. Ensure the MC9190-G is connectable (required when automatic re-connect is initiated). See Device Info Tab
on page 4-27.
2. Ensure that the remote Bluetooth device is in discoverable mode. See the devices user manual for
instructions.
3. Ensure that the A2DP/AVRCP profile is enabled on the MC9190-G. See Profiles Tab on page 4-31 for more
information.
To Next Page
Loading...
Need help?
General
