Motorola MC9190-G User Manual

4 - 20 MC9190-G User Guide
Sending a Contact
To send a contact to another device:
1. Tap and hold on OBEX Object Push and select Connect.
Figure 4-11 OBEX Object Push Window
2. In the Action: drop-down list, select Send Contact Information.
3. Tap .
Figure 4-12 Select Contact Entry Window
4. Select a contact to send to the other device.
5. Tap OK.
6. Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to
accept the contact. A Send Contact dialog appears.
7. Tap Ok.
Swapping Contacts
To swap contacts with another device:
NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a
contact.

Motorola MC9190-G Specifications

General

Brand	Motorola
Model	MC9190-G
Category	Handhelds
Language	English