9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 1216385142/08 EN ETOS
®
ED
Screensaver waiting time
You can use this parameter to set the screensaver waiting time.
Dimming
When you activate this function, the device reduces the brightness of the
display when the adjustable waiting time has expired if no key is pressed.
The device then switches back to full brightness when you subsequently
press any key.
If the screensaver and brightness dimming are activated, you have to press
any key twice in order to reactivate the display at full brightness.
Dimming waiting time
You can use this parameter to set the dimming waiting time.
Brightness dimming
Setting for the brightness when the display is dimmed. 100% corresponds to
full brightness, 10% to the lowest brightness.
9.8 SCADA
The following section describes how you can configure the device to connect
to a control system (SCADA). You can download the data points with the
help of the export manager [►Section 9.36, Page 324].
To Next Page
Loading...
