MR ETOS ED - Regulation; Response to control system disconnection (optional)

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020174 6385142/08 ENETOS
®
ED
▪ Internal temperature of the motor-drive unit (optional)
▪ Next maintenance (optional)
Figure128: Drive overview
1 Tap position 2 Tap-change indicator section
(SSE)
3 Operation counter 4 Operating mode
5 Switching blocking 6 Motor protective switch
7 Door open/closed 8 Temperatures
9 Next maintenance
► Go to Information > Motor and control cabinet > Drive.
9.15 Regulation
The general functions for regulating the on-load tap-changer are described
in this section.
9.15.1 Response to control system disconnection (optional)
If your device is equipped with a connection to a control system (SCADA),
you can use the following parameters to set how the device is to behave if
the connection to the control system is interrupted.
This function only works in the REMOTE operating mode.