MR ETOS ED - Control of the motor-drive unit (optional)

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 1696385142/08 EN ETOS
®
ED
9.12.3.2 Displaying the cooling system flow
You can display the temporal progression of the measured values of the
cooling system flow monitoring over the last 10 days.
Figure125: Cooling system flow
► Go to Information > Cooling system > Cooling stage 1/2.
9.13 Control of the motor-drive unit (optional)
The following parameters let you configure control of the motor-drive unit.
You can set the following:
▪ Switching pulse
▪ Motor runtime
▪ Switching direction
Settings
Parameters
Motor co...nit
Name Value
Switching pulse type Time-controlled pulse
Switching pulse time 1.5s
Switching pulse pause 2.5s
Activate motor runtime monitoring Off
Motor runtime 6s
Activate switching direction moni... Off
Switching direction Standard
Home
Events
Information
Recorder
Settings
EN
CHANGE
REBOOT
admin 03.02.2020 08:09
Figure126: Motor control unit
► Go to Settings > Parameters > Motor and control cabinet > Torque
monitoring .