MR ETOS ED - Setting Operator Interval for Transformer Maintenance

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 2996385142/08 EN ETOS
®
ED
9.31.2 Setting operator interval for transformer maintenance
You can define a maintenance interval of your choice for the transformer.
The maintenance interval is dependent on time. If the limit is reached
(100%), the device triggers an event message (red).
Settings
Parameters
Mainten....tor
Name Value
Activate interval Off
Duration 1.0a
Date of next maintenance 17.09.2066 23:59:21
Event (yellow) 90.0%
Home
Events
Information
Recorder
Settings
EN
CHANGE
REBOOT
admin 04.02.2020 11:14
Figure225: Maintenance: Transformer operator
1. Go to Settings > Parameters > Active part > Maintenance: Trans-
former operator.
2. Select the desired parameter.
3. Set the desired parameter.
4. Press the Accept button to save the modified parameter.