MR ETOS ED - Page 321

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 3216385142/08 EN ETOS
®
ED
If your RADIUS server supports the importing of a dictionary, you can export
the dictionary for ISM® devices from the device and import it onto your RA-
DIUS server. For more information, refer to the information in the section ti-
tled Exporting data [►Section 9.36.1, Page 325].
The user groups of the dictionary correspond to the user roles [►Section
9.34.1, Page 315] of the device and the corresponding authorizations.
9.34.5.2 Configuring RADIUS
To establish a connection to the RADIUS server, you must set the following
parameters.
Settings
Parameters
RADIUS
Name Value
Activate RADIUS client Off
RADIUS server 0.0.0.0
RADIUS server port 1812
Authentication protocol CHAP
Key (shared secret) default
Home
Events
Information
Recorder
Settings
EN
CHANGE
REBOOT
admin 04.02.2020 11:14
Figure243: Configuring RADIUS
You can only configure RADIUS if you are assigned an administrator role.
When in delivery status, you can log in as the administrator as follows:
▪ User name: admin
▪ Password: admin
1. Go to Settings > Parameters > System > RADIUS.
2. Select the desired parameter.
3. Set the parameter.
4. Press the Accept button to save the modified parameter.