MI
11
Innovation. Quality. Performance. Best in Industry. Worldwide.
Pierce Power
The Pierce Power function is used to provide the power the laser requires to completely penetrate the material.
1. Press Menu
to access the menu system.
2. Press X-axis Jog Arrows
until Params_2D is highlighted in blue.
3. Press Enter
to access the Params_2D sub-menu.
4. Press X-axis Jog Arrows
until Pierce Power is highlighted in blue.
5. Press Enter
to access the Pierce Power function.
6. Enter the power required for piercing using the number keypad (e.g., 30).
7. Press Enter
to record the Pierce Power and return to the Params_2D sub-menu.
Params_2D
Menu
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
To Next Page
Loading...
