KF
16
Innovation. Quality. Performance. Best in Industry. Worldwide.
Bar Code
The Bar Code function allows the operator to scan a label with the bar code scanner, which will automatically call
up and download the correct job for execution on the machine, and is an option on
MultiCam Lasers.
In addition,
MultiCam provides JobPreviewer to print bar code labels and tool path previews with operator
notes. The Bar Code Scanner is limited to 48 characters excluding the initial DNC path that is set up in
JobPreviewer or JobServer (e.g., C:\DNCfiles\).
1. Press Bar Code
to execute the Bar Code function. This will set the display to show when the system is bar
code ready.
2. Depress the trigger on the bar code scanner and scan the bar code label printed on the JobPreviewer sheet.
Example Only:
3. Press Start when prompted to begin the job. Hot Keys Keypad
Drive Enable
1. Press Drive Enable to enable all Servo Drives after a system error.
The display will prompt the operator to find home after re-enabling the motor drives.
2. Press Enter
to ensure proper machine operation. Hot Keys Keypad
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
To Next Page
Loading...
