SW
16
Innovation. Quality. Performance. Best in Industry. Worldwide.
MotionMechanic
The MotionMechanic application gives the operator advanced technical control over the use and setup of the
motion controller from a host PC with several specialized functions.
Operators can verify that MotionMechanic is active on the PC by locating the MotionMechanic icon
in the Windows systems tray at the bottom left.
Terminal Emulator provides direct access to the controller for development, diagnostics, or troubleshooting.
Text File Editor views, edits, or develops files related to the controller on the host PC. Files to be edited include
job files, configuration files, and any ASCII text file.
Session Log keeps a record of communication error statistics used for troubleshooting communications problems.
Session logs are stored between sessions of MotionMechanic. Software
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
To Next Page
Loading...
