FS
26
Innovation. Quality. Performance. Best in Industry. Worldwide.
Bi-Annually
The electrical cabinet should be checked during the bi-annual maintenance performed on the MultiCam Laser,
and operators should wear cloth or lint-free gloves when working with electrical components. Operators should
lockout incoming power before opening the cabinet and then vacuum out any debris that may have entered the
cabinet during regular working conditions. Operators should not use compressed air when cleaning out the
cabinet as this action may cause unwanted particles to short out some of the electrical components.
MultiCam recommends that the belts on all transmissions and Lead Screw Z-nuts be replaced every other year.
Fast Starts
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
To Next Page
Loading...
