RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 11
Product description 21
1230047 | 21.06.2013
2.4 Intended use
2.4.1 Intended purpose of the Rammax 1575
The Rammax 1575 trench roller is a roller specially designed for trench compacting.
The unlimited side clearance of the roller drums allows compacting in very narrow,
tight trenches right up to the trench walls. The wet, clayey soils found in sewer cons-
truction, pipeline construction, road foundations and construction backfilling, etc., are
the areas of application for this modern trench roller. The infrared remote control also
makes it possible to drive underneath trench shoring in trenches. In hazardous cons-
truction site applications, it is possible for the operator to control the machine from a
safe distance with no personal risk.
Normal modes of
operation
Use the Rammax 1575 roller exclusively for driving on and compacting:
● Unbonded layers (earth, gravel, crushed stone).
Special operating
modes
● Transport of the roller from A to B (crane and low loader).
● Cleaning the roller.
● Maintenance of roller according to maintenance plan or in the event of defects.
● Rectification of machine faults by trained personnel based on error messages.
● Towing the roller.
● Proper disposal by the operator in accordance with national regulations.
2.4.2 Requirements for the roller driver
Only trained, suitable and reliable specialists may operate the rollers.
2.4.3 Application limits
Tab. 2-4 Limits for application in consideration of environmental conditions
Operation Storage
Temperature limit -10°C to +48°C -25°C to +48°C
Humidity All-year operation/outdoor storage
Terrain Graded Graded
Upslope 40% with -/50% without vibration max. 15%
Downslope 40% with -
/50% without vibration max. 15%
PRODUCT DESCRIPTION
To Next Page
Loading...