MULTIQUIP Rammax Series - 1-point lifting eye details; Lifting procedures at 1-point eye

RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 85
Transport 109
1230047 | 21.06.2013
Fig. 12-1 Joint protection open/joint protection locked in place
12.2 1-point lifting eye
12.2.1 Lifting at the 1-point lifting eye
NOTE The lifting devices (steel cables, etc.) must be dimensioned in accordance with
relevant regulations.
1 Bring the joint protection into place.
2 Lift the roller vertically with suitable hoisting tackle.
2.1 Use suitable lifting equipment.
The 1-point lifting eye is designed for a WLL of 1.6 tons (Working Load Limit).
1
3
2
DANGER
Crushing hazard!
• Always lift the roller vertically.
• Do not stand under suspended loads!
• Use only anti-slip, stable ramps when loading!
• Secure the roller on transport vehicles to prevent it from rolling
away, slipping to the side or tipping over!
!
TRANSPORT