EasyManua.ls Logo

MULTIQUIP Rammax Series - Coolant checking and topping up

MULTIQUIP Rammax Series
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE 58 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
78 Rammax 1575
1230047 | 21.06.2013
Replace the ventilation filter (1) according to the maintenance plan.
9.10 Coolant
A coolant antifreeze mixture for up to -25° is provided upon delivery from the factory.
For temperatures colder than -25°, the fluid must be replaced by a suitable coolant
antifreeze mixture.
9.10.1 Checking coolant level
1 Check coolant level every day.
1.1 Check oil level while the roller is standing on a level surface and the
engine is cold.
1.2 You can read off the level of coolant on the expansion tank display.
The water level must be between the top (FULL) and bottom (LOW)
marks.
2* Top up coolant as required.
Fig. 9-19 Expansion tank
9.10.2 Topping up coolant
1 Unscrew the tank lid of the radiator.
2 Add coolant with antifreeze until the tank is full.
FULL
LOW
CAUTION
Danger of scalding from hot water / steam!
Only open the tank once the engine and the coolant have coo-
led down.
!
MAINTENANCE

Table of Contents

Related product manuals