MULTIQUIP Rammax Series - Declaration of Conformity (CE)

RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 3
3
1230047 | 21.06.2013
Declaration of Conformity
This is to certify that the machine | group of machines indicated below conform(s) to the relevant basic safety
and health requirements of the relevant EC directives in terms of their conception and design and in the form
marketed by us.
This declaration shall cease to be valid in the event of any change made to the machine/group of machines
after handover to the trader/user if such changes are not agreed with us.
Name of machine or group of machines:
Trench rollers
Model | Type:
Rammax 1575
Mode of functioning:
Ground compaction
Serial number:
See identification plate
Relevant EC directives:
- Machinery Directive 2006/42/EC
- Directive on Electromagnetic Compatibility 2004/108/EC
- Noise Directive 2000/14/EC
Applicable harmonized standards:
EN 500-1, EN 500-4,
Issuing testing office for
noise tests:
TÜV Austria
Testing office number: 0408
Machine type as per appendix I from
2000/14/EC:
No.: 8
Conformity evaluation as per 2000/14/EC:
According to appendix VI
Noise emissions:
Recorded sound power level: 100dB(A)
Guaranteed sound power level: 103dB(A)
Manufacturer:
Address:
Ammann Schweiz AG
Eisenbahnstrasse 25
CH-4901 Langenthal
Signatures:
Name:
Mode of functioning:
H. Queder
Plant manager
Ch. Anliker
Technology Manager
Authorized representative:
The technical documents are stored in the care of the above-
mentioned persons
Place, Date:
Langenthal, December 2012
DECLARATION OF CONFORMITY (CE)