RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15) — PAGE 15
26 Rammax 1575
1230047 | 21.06.2013
3.3 Noise levels
The following noise level measurements were carried out by an accredited testing
and monitoring body in accordance with machine directive 2000/14/EEC of the
European parliament and council.
Inspecting and monitoring organization: TÜV Österreich (Austrian technical inspec-
torate) Testing body no. 0408
DANGER
Crushing hazard in the area of the articulated joint
• During operation, there is always a crushing hazard in the area
of the articulated joint. Therefore, it is not permitted for persons
to be in this area during operation. In general, a safety distance
of at least 2 meters to the machine must be maintained during
operation.
DANGER
Crushing of toes through careless handling of the roller!
• Wear safety shoes when working with the roller in order to help
avoid crushed toes.
DANGER
Danger of accident through improper operation of the roller!
• Read the operating instructions before operating the roller.
• Adhere to the safety regulations at all costs.
• In case of lack of clarity, contact your authorized dealer.
WARNING
Hearing damage due to continuous noise level!
Depending on the use of equipment it is possible that the al-
lowed noise level of 85dB (A) will be exceeded.
• Wear ear protectors in accordance with national accident pre-
vention regulations when working at higher noise levels.
SAFETY INFORMATION
To Next Page
Loading...