MUTOH ValueJet 1304 - Page 119

User’s Guide ValueJet 1304
Troubleshooting
AP-75780 - Revision 1.3 119
6
Printing is blurred
White or black lines appear on printed media
N° Possible cause Remedy Reference
1
Are you using the recommended
media?
Use the recommended media.
MediaType
menu on
page63
2
Are you using the thick or thin
media?
Use the recommended media.
MediaType
menu on
page63
3
Is the media printed on the printing
surface?
Confirm the printing surface of
the media and set it correctly.
Installing roll
media on
page40
4 Did you perform Alignment? Perform Alignment.
Adjust the
print head on
page108
5
Did you perform Media feed
compensation?
Perform Media feed
compensation.
Media feed
compensation
on page46
6
Is each heater set to the appropriate
temperature?
Set it to the appropriate
temperature.
Panel Setup
Menu on
page62
7 Is the head height set to High?
Return the head height to
"Normal (Low)".
Head height
adjustment on
page45
N° Possible cause Remedy Reference
1
Are you using the recommended
media?
Use the recommended media.
MediaType
menu on
page63
2 Is the scroller set correctly? Set the scroller correctly.
Installing
roll media on
page40
3 Is the nozzle in good condition? Perform Head cleaning.
Open the
front cover.
on page98
4 Did you perform Alignment? Perform Alignment.
Adjust the
print head
on page108