User’s Guide ValueJet 1304
Troubleshooting
120 AP-75780 - Revision 1.3
Printing lines are not straight
Printing lines are duplicated or patchy
5
Did you perform Media feed
compensation?
Perform Media feed
compensation.
Media feed
compensatio
n on page46
6
Is each heater set to the appropriate
temperature?
Set it to the appropriate
temperature.
Panel Setup
Menu on
page62
7 Is the head height set to High?
Return the head height to
"Normal (Low)".
Head height
adjustment
on page45
N° Possible cause Remedy Reference
N° Possible cause Remedy Reference
1
Is the ink cartridge within the validity
period?
Use a new ink cartridge.
Replacing
ink cassettes
on page30
2
Are you using the recommended
media?
Use the recommended media.
MediaType
menu on
page63
3 Did you perform Alignment? Perform Alignment.
Adjust the
print head
on page108
4
Did you perform Media feed
compensation?
Perform Media feed
compensation.
Media feed
compensatio
n on page46
N° Possible cause Remedy Reference
1 Is the nozzle in good condition? Perform Head cleaning.
Open the
front cover.
on page98
2 Is the head height set to High?
Return the head height to
"Normal (Low)".
Head
height
adjustment
on page45