NEC SL1100 - Page 153

Program
Number
Program Name Default Note
21-01-16 System Options for Outgoing Calls - Supervise
Dial Detection Timer
20 (seconds)
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
4
22-01-01 System Options for Incoming Calls - Incoming
Call Priority
1
22-01-02 System Options for Incoming Calls - Incoming
Call Ring No Answer Alarm
0
22-01-03 System Options for Incoming Calls - Ring No
Answer Alarm Time
60 (seconds)
22-01-04 System Options for Incoming Calls - DIL No An-
swer Recall Time
0 (seconds)
22-02-01 Incoming Call Trunk Setup 0
22-03-01 Trunk Ring Tone Range - Ring Tone Pattern 0
22-04-01 Incoming Extension Ring Group Assignment Extension 101~108 (first eight
ports) ring for incoming Ring Group
1 calls. No other extensions ring for
incoming Ring Group 1 calls.
22-05-01 Incoming Trunk Ring Group Assignment 1
22-06-01 Normal Incoming Ring Mode 1
22-07-01 DIL Assignment not assigned
22-08-01 DIL/IRG No Answer Destination 1
82-08-01
(MF Level)
Sidetone Volume Setup 6
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
Depending on system programming, this may answer the call and you can skip step 2.
2. Dial #0.
If you hear error tone, your extension Class of Service prevents Universal Answer.
To listen to the incoming trunk ring choices:
1. Press Speaker key.
2. Dial 711 + 2.
3. Select the ringing (1~7) you want to check.
4. Go back to step 3 to listen to additional choices or press Speaker key to hang up.
ISSUE 2.0
SL1100
Features and Specifications Manual 1-141
C