NEC SL1100 - Page 167

Program
Number
Program Name Default Note
20-13-49 Class of Service Options (Supplementary
Service) - BLF Indication on CO Incom-
ing State
COS 01~15 = 0
20-13-50 Class of Service Options (Supplementary
Service) - AIC Agent display which call is
from
COS 01~15 = 1
20-13-51 Class of Service Options (Supplementary
Service) - Number and Name appear in
the directory
COS 01~15 = 1
20-14-01 Class of Service Options for DISA - First
Digit Absorption (Delete First Digit Di-
aled)
COS 01~15 = 0
20-14-02 Class of Service Options for DISA -
Trunk Group Routing/ARS Access
COS 01~15 = 1
20-14-03 Class of Service Options for DISA -
Trunk Group Access
COS 01~15 = 1
20-14-04 Class of Service Options for DISA - Out-
going System Speed Dialing
COS 01~15 = 0
20-14-05 Class of Service Options for DISA - Oper-
ator Calling
COS 01~15 = 1
20-14-06 Class of Service Options for DISA - Inter-
nal Paging
COS 01~15 = 1
20-14-07 Class of Service Options for DISA - Ex-
ternal Paging
COS 01~15 = 1
20-14-08 Class of Service Options for DISA - Di-
rect Trunk Access
COS 01~15 = 0
20-14-09 Class of Service Options for DISA -
Forced Trunk Disconnect <Not for ISDN
T-point>
COS 01~15 = 0
20-14-10 Class of Service Options for DISA - Call
Forward Setting by Remote via DISA
COS 01~15 = 0
20-14-11 Class of Service Options for DISA -
DISA/Tie Trunk Barge-In
COS 01~15 = 0
20-14-12 Class of Service Options for DISA - Re-
trieve Park Hold
COS 01~15 = 1
Operation
To change an extension Class of Service (via Service Code 677) :
1. Press Speaker key.
2. Dial 677.
3. Dial the extension number you want to change.
You see: MODE1: nn
Press Hold key to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-155
C