Related Features
Automatic Call Distribution (ACD) (V1.5 or higher)
Call Forwarding
Transfer
InMail
Voice Response System (VRS)
Guide to Feature Programming
The items highlighted in gray are read only and cannot be changed.
Program Num-
ber
Program Name Default
11-07-01 Department Group Pilot Numbers -Dial not assigned
15-07-01 Programmable Function Keys Refer to Programming Manual.
16-01-01 Department Group Basic Data Setup - Department Name not assigned
16-01-02 Department Group Basic Data Setup - Department Call-
ing Cycle
0
16-01-03 Department Group Basic Data Setup - Department Rout-
ing When Busy (Auto Step Call)
0
16-01-04 Department Group Basic Data Setup - Hunting Mode 0
16-01-05 Department Group Basic Data Setup - Extension Group
All Ring Mode Operation
0
16-01-06 Department Group Basic Data Setup - STG Withdraw
Mode
0
16-01-07 Department Group Basic Data Setup - Call Recall Restric-
tion for STG
0
16-01-09 Department Group Basic Data Setup - Department Hunt-
ing No Answer Time
15 (seconds)
16-01-10 Department Group Basic Data Setup - Enhanced Hunt
Type
0
16-02-01 Department Group Assignment for Extensions Refer to Programming Manual.
16-03-01 Secondary Department Group not assigned
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Ex-
tension are Class 1
20-09-07 Class of Service Options (Incoming Call Service) - Call
Queuing
COS 01~15 = 1
20-11-17 Class of Service Options (Hold/Transfer Service) - De-
partment Group Trunk-to-Trunk Transfer (Each Tele-
phone Group Transfer)
COS 01~15 = 1
20-13-06 Class of Service Options (Supplementary Service) - Au-
tomatic Off-Hook Signaling (Automatic Override)
COS 01~15 = 1
20-13-14 Class of Service Options (Supplementary Service) - De-
partment Calling (PLT No Called Extension)
COS 01~15 = 1
22-02-01 Incoming Call Trunk Setup 0
22-07-01 DIL Assignment not assigned
ISSUE 2.0 SL1100
Features and Specifications Manual 1-769
U
To Next Page
Loading...
