EasyManuals Logo

NETGEAR D7000 User Manual

NETGEAR D7000
293 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
DescriptionField
Select the encapsulation, as indicated by your ISP:
• PPPoE (PPP over Ethernet).Your Internet connection uses PPP over Ethernet.
• PPPoA (PPP over ATM).Your Internet connection uses PPP over ATM.
Encapsulation
Enter the login name that you use to log in to your Internet service, as indicated by
your ISP.
This login name is often an email address.
Login
Enter the password that you use to log in to your Internet service, as indicated by
your ISP.
Password
Enter the service name that you use to log in to your Internet service, as indicated
by your ISP.
Often, a service name is not required.
This field does not display if your selection from the Encapsulation
menu is PPPoA (PPP over ATM).
Note
Service Name
Select how the Internet connection functions:
• Always On. Once the Internet connection is established, it remains active.This
is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet, the
Internet connection is established. When the idle time-out period expires, the
Internet connection is terminated.
• Manually Connect.You must connect to the Internet manually (see View,
Establish, or Terminate the PPPoE or PPPoA Internet Connection on page 235).
Connection Mode
If you select Dial on Demand from the Connection Mode menu, enter the idle
time-out period in minutes.
The idle time-out specifies how long the modem router keeps the Internet connection
active when no one on the network is using the Internet connection.The default is
5 minutes.To disable the idle time-out, enter 0. (When you disable the idle time-out,
the connection is not terminated automatically).
Idle Timeout (minutes)
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Your ISP uses DHCP to assign your IP address.Your ISP automatically assigns
these addresses.
Get Dynamically from ISP
Manage the Internet Settings Manually
58
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Table of Contents

Other manuals for NETGEAR D7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR D7000 and is the answer not in the manual?

NETGEAR D7000 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
ModulationPSK
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
Memory card slot(s)No
Ethernet LAN (RJ-45) ports5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
DSL specificationVDSL, VDSL2, ADSL, ADSL2, ADSL2+
Web-based management-
Firewall securitySPI, NAT
Security algorithmsWPA, WPA2-PSK, WPS
Product typeTabletop router
Product colorBlack
Housing materialPlastic
Flash memory128 MB
Internal memory256 MB
Processor cores2
Processor frequency1000 MHz
Windows operating systems supportedWindows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Cables includedLAN (RJ-45), Phone (RJ-11)
Supported network protocolsIPv6
Power source typeAC
Package typeBox
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals