NETGEAR ProSafe GS108

GS108T Smart Switch Software Administration Manual
3-22 Managing System Settings
v1.0, May 2007
MSAP (Remote) Information
1. Click MSAP Information in the blue navigation panel. A screen similar to that shown below
appears.
Power Value Indicates the total power in watts required by a PD device from a PSE device, or the total
power a PSE device is capable of sourcing over a maximum length cable based on its
current configuration.
Network
Policy
Network policy is associated with multiple sets of application types supported on a given
port.
• Application Type: Integer value indicating the primary function of the application(s)
defined for this network policy, advertised by an Endpoint or Network Connectivity
Device.
• Unknown Policy Flag: Indicates that an Endpoint Device wants to explicitly advertise
that, this policy is required by the device, but is currently unknown.
• Tagged Flag: Indicates whether the specified application type is using a tagged or an
untagged VLAN.
• Reserved: Reserved for future standardization.
• VLAN ID: Contains the VLAN identifier (VID) for the port.
• L2 Priority: Indicates the Layer 2 priority to be used for the specified application type.
• DSCP Value: Contains the DSCP value to be used to provide Diffserv node behavior
for the specified application type.
Table 3-4. MED Set Details (continued)
Item Description