NETGEAR ProSafe GS108

GS108T Smart Switch Software Administration Manual
4-6 Configuring the Switch
v1.0, May 2007
• UnkonwnProtos: indicates received packets using unknown protocols.
Summary statistics
• DropEvents: indicates packets which are dropped due to GBP or backpressure discard.
• MulticastPkts: indicates transmitted/received multicast packets.
• BrodcastPkts: indicates transmitted/received broadcast packets.
• UndersizePkts: indicates received packets with length less than minimum packet size.
• OversizePkts: indicates received packets with length more than maximum packet size.
• Fragments indicates received packets (length 10 ~ 63 bytes) with invalid FCS or
alignment error.
• Jabbers: indicates received packets (invalid FCS or code error) which exceed counter
maximum size to maximum receive frame length.
• Collisions: indicates total transmitted collision packets.
• CRCAlignErr: indicates received packets (invalid FCS) which lengths are between 64
bytes to counter maximum size.
• TotalOctets: indicates total received (excluding framing bits, but including FCS bytes)
and transmitted (including fragments of frames that were involved with collisions, but
excluding preamble/SFD or jam bytes) byte.
• TotalPkts: indicates total received and transmitted packet count (including bad packets,
all unicast, broadcast, multicast and MAC control packets).
• 64 BytePkts: indicates transmitted packets with packet length less than or equal to 64
bytes.
• 65-127 BytePkts: indicates transmitted packets with packet length between (include) 65 ~
127 bytes.
• 128-255 BytePkts: indicates transmitted packets with packet length between (include)
125 ~ 255 bytes.
• 256-511 BytePkts: indicates transmitted packets with packet length between (include) 256
~ 511 bytes.
• 512-1023 BytePkts: indicates transmitted packets with packet length between (include)
512 ~ 1023 bytes.
• 1024-1518 BytePkts: indicates transmitted packets with packet length between (include)
1024 ~ 1518 bytes.
4. Click Refresh to update the port statistics.