Full Color Card Printer
18
4 Take up the Ink Ribbon slack.
• Turn the knob as in the diagram at right, and take up
the ribbon slack.
• If the slack is not taken up properly, then the Ink
Ribbon may jam.
5 Insert the Ink Ribbon Cassette.
• Insert the Ink Ribbon Cassette until a "click" is heard.
→For replacing Transfer Film or Cleaning Tape, See
"Transfer Film Replacement" on page 19, or "Cleaning
Tape Replacement" on page 22.
When inserting the Ink Ribbon Cassette,
insert while turning the knob in order to
prevent slack.
Slack of Ink Ribbon may lead to print
abnormalities.
6 Close the Front Cover.
7 When [Push SET key] appears on the
screen, press the SET Key.
• Clear an error first if the error message such as [Card
Empty] appears, then press the SET Key.
→See "When an Error Message Appears" on page 67
for clearing error messages.
Push SET key
To Next Page
Loading...
