Full Color Card Printer
46
Switching the Card Ejection Slot
You can switch the slot from which printed cards are output to Card Ejection Slot (Left) and
(Right).
The factory default is set so that correctly printed cards are output from the Card Ejection Slot
(Left), and cards with errors are output from Card Ejection Slot (Right).
You can also change the settings by using the printer driver (→See "Opening the
Printer Driver Settings Screen" on page 87).
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2 Press the Key until [Card Setup] is
displayed, then press the SET Key.
3 After using the / Keys to switch
between [Normal Exit]/[Error Exit],
press the SET Key.
• Select where to output correctly printed cards on the
[Normal Exit] menu, and where to output abnormal
cards on the [Error Exit] menu.
Ready to Print
Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Card Setup
SET:>>
Card Setup
SET:>>
Card Type Card Type
SET
Card Type
Normal Exit
LEFT SIDE
Error Exit
RIGHT SIDE
SET
Normal Exit
LEFT SIDE
SET
Error Exit
RIGHT SIDE
To Next Page
Loading...
Need help?
General
