Printer Settings
37
Adjusting the contour level
You can adjust the sharpness of edges such as facial contour.
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2 Press the Key until [Image Setup] is
displayed, then press the SET Key.
3 Press the Key until [Sharpness] is
displayed, then press the SET Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• If you increase the setting value, contours will be more
pronounced. If you increase the setting value too
much, the image quality may appear grainy.
Ready to Print
Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Image Setup
SET:>>
Print Quality
SET
Printer Info.
SET:>>
Printer Info.
SET:>>
Sharpness
Print Quality
SET
0
Sharpness
0
Sharpness
0
Sharpness
Sharpness
2
-2
To Next Page
Loading...
Need help?
General
