Full Color Card Printer
36
Correcting image and text misalignment
You can correct the misalignment (horizontal) of the color image and black text printing
position.
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2 Press the Key until [Image Setup] is
displayed, then press the SET Key.
3 Press the Key until [Black
Correction] is displayed, then press the
SET Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• If you increase the setting value, the black text will
move towards the right of the color image. (Setting
values are by increments/decrements of
approximately 0.1 mm)
Ready to Print
Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Image Setup
SET:>>
Print Quality
SET
Printer Info.
SET:>>
Printer Info.
SET:>>
Print Quality
Black Correction
SET
Black Correction
0
Black Correction
0
Black Correction
0
Black Correction
Black Correction
20
-20
-+
Color Image
Card
[Black Correction]
Black Text
To Next Page
Loading...
