Printer Settings
31
Turning the Error Alarm On or Off
The initial setting is for the buzzer to sound when an error occurs.
You can set the buzzer so that it does not sound.
You can also change the settings by using the printer driver (→See "Opening the
Printer Driver Settings Screen" on page 87).
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2 Press the Key until [Printer Setup] is
displayed, then press the SET Key.
3 Confirm that [Buzzer] appears, and
press the SET Key.
4 Change the settings by using the /
Keys, then press the SET Key.
• Pressing the / Keys switches between [ON] and
[OFF].
• Set it to [ON] to sound the buzzer or [OFF] to turn the
buzzer off.
Ready to Print
Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Printer Setup
SET:>>
Printer Setup
SET:>>
Buzzer
ON
Buzzer
ON
SET
Buzzer
ON
Buzzer
ON
Buzzer
ON
Buzzer
ON
Buzzer
OFF
Buzzer
OFF
To Next Page
Loading...
Need help?
General
