Nisca PR-C201 - Set Ink Ribbon;Transfer Film Type

Printer Settings
39
Setting the Type of Ink Ribbon or Transfer Film to Use
Set the type of Ink Ribbon or Transfer Film to use.
→See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about changing the Ink Ribbon and Transfer
Film.
→See "Ink Ribbon/Transfer Film" on page 81 for details about which Ink Ribbon and Transfer Film you can use.
Note
 You can also display the status on the printer driver (→See "Opening the Printer
Driver Settings Screen" on page 87).
1 Switch from Normal Mode to User
Mode.
→See "Switching to User Mode" on page 24 for details on
how to switch to User Mode.
2 Press the  Key until [Ribbon Setup] is
displayed, then press the SET Key.
3 Press the  Key until [Ribbon Type] or
[Film Type] is displayed, then press the
SET key.
Ready to Print Ready to Print
Printer Info.
SET:>>
Printer Info.
SET:>>
MENU
Normal Mode User Mode
Ribbon Setup
SET:>>
Ribbon Type
SET
Printer Info.
SET:>>
Ribbon Type
OOOOO
SET
Ribbon Type
OOOOO
Film Type
OOOOO
SET
Film Type
OOOOO