Cleaning
65
5 Insert a flat screwdriver or coin into the
groove on the end of the feeding roller.
• Ensure you have a flat screwdriver or coin that can fit
into the groove on the end of the feeding roller.
6 Wipe the roller clean.
• Turn the screwdriver (or coin), and wipe the feeding
roller using a cotton swab with a long handle fully
moistened with water.
7 Return the Ink Ribbon Cassette and the
Transfer Film Cassette to their original
positions.
→See "Changing the Ink Ribbon and Transfer Film" on
page 16 for details about attaching the Ink Ribbon and
Transfer Film.
8 Close the Front Cover.
Flat Screwdriver
Feeding Roller
To Next Page
Loading...
