Troubleshooting
79
White cards (unprinted
cards) are output.
Only color image data was received with the Black Ink Ribbon
loaded.
Use the Overcoating Color Ink Ribbon when printing in color.
→See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Ink Ribbon.
Secondary transfer conditions (speed and temperature) are not
optimum.
Set secondary transfer conditions in accordance with cards used.
→See "Setting the Types of Card to Use" on page 42 for instructions on setting
secondary transfer conditions.
General Print Problems
(Incorrect Colors, etc.)
The Ink Ribbon type setting is different.
Set the printer according to the type of Ink Ribbon used.
→See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 39 for
details on how to set the Ink Ribbon type.
Fine lines are not printed. Contact your reseller.
There is a surface
irregularity.
Contact your reseller.
There are partial white areas. Contact your reseller.
To Next Page
Loading...
Need help?
General
