Nordson Asymtek Spectrum Series - Figure 4-3 Fmxp Message 30416; Figure 4-4 Fmxp Main Window

Power-Up and Testing 4-5
2. If the FmXP Message 30416 - Dispenser Motor References Not Found appears, click OK to
home the dispenser (
Figure 4-3).
Figure 4-3 FmXP Message 30416
! The FmXP Main Window (Figure 4-4) will open.
Figure 4-4 FmXP Main Window
3. Check to make sure the dispensing head is in the proper home position.
" NOTE If you receive any error messages, refer to Section 8 - Troubleshooting or to the
Fluidmove User Guide or Online Help.