101
Chapter 9
Replacing media drives
In this chapter
"SCSI and IDE drive cabling" (page 101)
"Replacing a faulty hard drive" (page 102)
"Replacing the tape drive" (page 109)
"Replacing the CD-ROM drive" (page 113)
"Replacing the floppy disk drive" (page 116)
SCSI and IDE drive cabling
Cabling diagram
"SCSI and IDE drive cabling." (page 102) shows the following:
•
cabling for and termination of SCSI devices (hard drives and tape drives)
• cabling for an IDE CD-ROM drive
Use the information in this section to assist you with the procedures for
replacing a faulty hard drive, tape drive, or CD-ROM drive
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
