Nortel CallPilot - Cooling Fans Description

Cooling fans description 89
Step Action
1
Hold the cover flat against the chassis.
2
Slide the cover toward the front of the server until it locks into place.
3
Tighten the two thumbscrews on the back of the server.
4
If you removed the chassis feet, reinstall them.
5
Connect all external peripheral device cables and the power cord
to the back panel.
6
Power up the server.
—End—
Server side cover
Cooling fans description
For cooling and airflow, the system contains five fans that cool the interior
of the server.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.