Nortel CallPilot - BIOS Settings

158 Chapter 13 Working with the CallPilot server BIOS
The BIOS version appears after the MAC address information.
—End—
You can also find the BIOS version in the BIOS configuration sections in the
server menu. See "To configure the BIOS" (page 163) for instructions.
BIOS settings
This section identifies the 703t server BIOS settings:
• Main ("Main" (page 158))
•
Advanced (see "Advanced" (page 159))
•
Security (see "Security" (page 160))
• Server (see "Server" (page 160))
•
Boot (see "Boot" (page 161))
See "To configure the BIOS" (page 163) for instructions on how to verify that
the 703t server settings are set to the values given in the following sections.
Main
Main BIOS settings
Options Settings
System Time Set for the current time.
System Date Set for the current date.
Floppy A: 1.44/1.25/1.2 Mbytes, 3.5 inch
Hard Disk
Pre-Delay
Disabled
Primary IDE
Master
CD-ROM
Primary IDE
Slave
None
Secondary IDE
Master
None
Secondary IDE
Slave
None
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.