Nortel CallPilot - Page 159

BIOS settings 159
Options Settings
Processor
Settings
•
Processor POST speed setting: 2 GHz
(shown in grey)
•
Processor Retest: Disabled
•
Processor Hyperthreading: Enabled
•
Processor 1 CPU ID: F24 (shown in grey)
• Processor 1 CPU L2 Cache size: 512k
ECC (shown in grey)
•
Processor 2 CPU ID: Not installed (shown
in grey)
•
Processor 2 CPU L2 Cache size: (shown
in grey)
Language English (US)
Advanced
Advanced BIOS settings
Options Settings
PCI Configuration Use default values. Default values are generated by
pressing F9 before you change CMOS values.
•
USB: Enabled
•
NIC1: Enabled
•
NIC2: Enabled
•
Video: Enabled
•
SCSI: Enabled
• Option ROM: Enabled (where applicable)
•
PCI slots ROM: Enabled
Integrated Peripheral
Configuration
•
COM1: 3f8/IRQ4
•
COM2: 2f8/IRQ3
•
Parallel Port: ECP/378/IRQ7/DMA Channel 3
• Floppy disk controller: Enabled
•
Legacy USB support: Auto
•
Front Panel USB: Disabled
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.