Nortel CallPilot - Diagnostics Tool

74 Chapter 7 Using CallPilot system utilities
Utility Description
•
particulars about the CallPilot 5.0 system, such as
names, keycodes, serial numbers, IP addresses,
and system numbers
Accessing the system utilities
All CallPilot utilities are accessible from the CallPilot server in the Start →
Programs → CallPilot → System Utilities menu.
Diagnostics Tool
The Diagnostics Tool allows you to enable or disable CallPilot startup
diagnostics. CallPilot startup diagnostics automatically identify hardware
problems that may exist when the system and its services are started.
Diagnostics are displayed for:
•
Media Bus, MPB board, MPC/DSP
(for Meridian 1 and Communication Server 1000)
When you disable startup diagnostics, you can save time during system
maintenance operations where restarts or Call Processing services restarts
are required.
There are three recommended steps:
Step Action
1
Use the Diagnostics Tool to turn off CallPilot startup diagnostics.
2
Perform system maintenance.
3 Use the Diagnostics tool to turn on CallPilot startup diagnostics.
—End—
To access the Diagnostics Tool
On the Windows desktop, click Start → Programs → CallPilot → System
Utilities → Diagnostic Tool.
Result: The Diagnostics Tool window appears.
To enable startup diagnostics
From the Diagnostics Tool window, select Configuration → Maintenance
Startup Diag → Enable.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.