Session Trace 75
To disable startup diagnostics
ATTENTION
Nortel recommends that you leave the startup diagnostics turned on. When you
disable CallPilot startup diagnostics, you prevent CallPilot from automatically
identifying hardware problems that may exist when the system and its services
are started.
On the Diagnostics Tool window, select Configuration → Maintenance
Startup Diag → Disable.
PEP Maintenance utility
The PEP Maintenance utility displays a list of all installed PEPs on the
server and enables you to uninstall PEPS. For information on installing
or uninstalling PEPs, refer to the
Installation and Configuration Task List
(NN44200-306).
To access the PEP Maintenance utility
From the Windows desktop, click Start → Programs → CallPilot → System
Utilities → PEP Maintenance Utility.
Result: The DMI Viewer window appears.
To view a list of all installed PEPs
Step Action
1
Click the component for which you want to display the PEP list.
2
Click Show PEPs.
Result: A list of all installed PEPs appears in the left pane.
3
If you want to review the readme file associated with a PEP, click the
PEP, and then click Read.
Result: The readme file opens in Notepad.
—End—
Session Trace
The Session Trace tool displays detailed information about the activity in a
user’s mailbox and the state of the message waiting indicator (MWI). The
session information includes
•
voice messaging
•
call answering
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
