Nortel CallPilot - Page 140

140 Chapter 11 Replacing or adding voice processing boards
MPB96 board installation
Note: For Meridian 1 and Communication Server 1000 systems, the
MPB96 board is installed in slot 4.
To replace an MPB96 board
Step Action
1
Prepare the server for MPB96 board replacement as follows:
a. Shut down the server, shut off the power, and then disconnect
the following cables:
•
power cable
•
peripheral device cables
•
DS30X cable(s) (Meridian 1 and Communication Server
1000 only)
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.