Table 1. Acronyms and abbreviations (continued)
Term Description
SS Spread spectrum
SSC Spread spectrum clocking
TCXO Temperature compensated crystal (Xtal) oscillator
UART Universal asynchronous receiver/transmitter
UDIMM Unbuffered dual inline memory module
UFT Universal frequency translator
USB Universal serial bus
USXGMII Universal serial 10 gigabit media independent interface
XGT 10GBase-T
XSPI Octal serial peripheral interface
1.2 Related documentation
The table below lists and explains the additional documents and resources that you can refer to for more information on the
LX2160ARDB. Some of the documents listed below may be available only under a non-disclosure agreement (NDA). To request
access to these documents, contact your local NXP field applications engineer (FAE) or sales representative.
Table 2. Related documentation
Document Description Link / how to access
QorIQ LX2160A Reference Design
Board Getting Started Guide
Explains the LX2160ARDB settings and physical connections
needed to boot the board
LX2160ARDBGSG.pdf
QorIQ LX2160A Reference Design
Board Errata
Describes known errata and workarounds for the
LX2160ARDB
LX2160ARDBE.pdf
QorIQ LX2160A Product Brief Provides a brief overview of the LX2160A processor LX2160APB.pdf
QorIQ LX2160A Data Sheet Provides information about electrical characteristics,
hardware design considerations, and ordering information
Contact NXP FAE /
sales representative
QorIQ LX2160A Reference Manual Provides a detailed description about the LX2160A QorIQ
multicore processor and its features, such as memory map,
serial interfaces, power supply, chip features, and clock
information
Contact NXP FAE /
sales representative
QorIQ LX2160A Chip Errata Lists the details of all known silicon errata for the LX2160A Contact NXP FAE /
sales representative
QorIQ LX2160A Design Checklist,
AN5407
Provides recommendations for new designs based on the
LX2160A. This document can also be used to debug newly
designed systems by highlighting those aspects of a design
that merit special attention during initial system start-up.
Contact NXP FAE /
sales representative
Layerscape Software Development
Kit User Guide
Describes how to work with LSDK, which is a complete Linux
kit for NXP QorIQ Arm-based SoCs and the reference and
evaluation boards available for them.
LSDKUG.pdf
Table continues on the next page...
NXP Semiconductors
LX2160ARDB Overview
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020
Reference Manual 5 / 116
To Next Page
Loading...
