NXP Semiconductors QorIQ LX2160A - 2.19.2 System startup

Diagram
Bits
7 6 5 4 3 2 1 0
R MIN BOM MODEL
W
NONE 0 1 00 0000
Fields
Field Function
7
MIN
Programming Model Type:
0= Normal Qixis register set.
1= Subset Qixis register set (QixMin).
6
BOM
Model Register Encoding:
0= Lower 4 bits contain programming model revision (MODEL).
1= reserved.
5-4
-
Reserved.
3-0
MODEL
Model (BOM Version) Information:
0000= No revision: PCB version is 'A', 'B', etc.
0001= Revision 1 : PCB version is 'A1', 'B1', etc.
0010= Revision 2 : PCB version is 'A2', 'B2', etc.
and so forth.
Note that this field should be appended to the VER.PCB information only if non-zero.
3.8 Minor Revision (MINOR)
Address
Register Offset
MINOR 004h
Function
The MINOR (or MINTAG) register can be used to obtain CPLD build information from software. The register returns a subset of
the Qixis QTAG facility but more than the limited MINOR facility on other RDBs.
Writes to MINOR select various pieces of information for subsequent read. On reset, the 'minor revision' field is returned, for
backward-compatibility.
NXP Semiconductors
Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020
Reference Manual 62 / 116