NXP Semiconductors QorIQ LX2160A - 3.10 General Control (CTL)

Table continued from the previous page...
Field Function
TXFLT 0= SFP module reports no transmit errors.
1= SFP module reports transmit fault.
4
RXLOS
SFP3_RX_LOS Status:
0= SFP module reports no receive errors.
1= SFP module reports receive loss-of-signal.
3-1
-
Reserved.
0
TXEN_B
SFP3_TX_EN Control:
0= SFP module transmitter is enabled.
1= SFP module transmitter is disabled.
3.22 LOS Status (LOS)
Address
Register Offset
LOS 01Dh
Function
The LOS register reports LOS (Loss Of Signal) or LOL (Loss of Lock) for
various interfaces.
Diagram
Bits
7 6 5 4 3 2 1 0
R CKLOL RT25G
W
NONE 000000 0 0
Fields
Field Function
7-2
-
Reserved.
1 SI5341 Loss of Lock:
Table continues on the next page...
NXP Semiconductors
Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020
Reference Manual 74 / 116