NXP Semiconductors QorIQ LX2160A - 3.5 Board Version (VER)

Diagram
Bits
7 6 5 4 3 2 1 0
R SLOT2 SLOT1
W
NONE 111111 1 1
Fields
Field Function
7-2
-
Reserved.
1
SLOT2
(same as SLOT1)
0
SLOT1
0= a card is installed.
1= no card is installed.
3.16 LED Control (LED)
Address
Register Offset
LED 00Eh
Function
The LED register can be used to directly control the monitoring LEDs (M7-M0) for software debugging or other purposes. Direct
control of the LEDs is possible only when CTL[LED] is set to 1; otherwise they are used to display general system activity.
Diagram
Bits
7 6 5 4 3 2 1 0
R
LED
W
GRST
00000000
Fields
Field Function
7-0
LED
LED Status Control:
0= LED M[bitno] is off.
1= LED M[bitno] is on.
NXP Semiconductors
Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020
Reference Manual 69 / 116