Table continued from the previous page...
Field Function
FAIL 0= FAIL LED is not asserted due to software (it might still be on due to hardware failures).
1= FAIL LED is forced on. Generally, this indicates a software-diagnosed error.
3.11 Auxiliary (AUX)
Address
Register Offset
AUX 006h
Function
The AUX register may be used by software to store information. The AUX register is initialized to zero when the system is powered-
up, and never altered by hardware again.
Diagram
Bits
7 6 5 4 3 2 1 0
R
AUX
W
ARST
00000000
Fields
Field Function
7-0
AUX
User-defined value.
3.12 System Status (STAT_SYS)
Address
Register Offset
STAT_SYS 009h
Function
The STAT_SYS register reports general system status.
NXP Semiconductors
Qixis Programming Model
QorIQ LX2160A Reference Design Board Reference Manual, Rev. 4, 07/2020
Reference Manual 65 / 116
To Next Page
Loading...
