5.6.3 Input at the operator panel
A29246-X20-X-4-7680 / fa505.fm 125
5.6.3 Input at the operator panel
When starting a new job or changing the paper, new printer settings at the operator panel
may be necessary.
Selecting a job or form-specific printer setting:
Job and form-specific printer settings can be saved under a name in the <Setup> menu.
When you load a predefined setup, the printing system is automatically configured with the
corresponding parameters for the print job.
Select various settings for paper change:
• Enter the paper format length
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. On the operator panel select:
• For universally valid print job setups:
<VarioStream> <Setup> menu
• For channel-specific setups:
<VarioStream> <Setup channel A / B / C> menu
3. Select setup in the "Setup List" tab.
4. Click on the following button:
5. Click "Setup Contents" tab and check settings.
To Next Page
Loading...
