5.10.2 Converting the printing system
A29246-X20-X-4-7680 / fa509.fm 165
5.10.2 Converting the printing system
The following worksteps must be carried out in sequence in order to convert the printing
system to the desired configuration:
• 5.10.2.1 Start conversion >>> page 165
• 5.10.2.2 Replacing the toner feed >>> page 166
• 5.10.2.3 Replacing the developer station >>> page 168
• 5.10.2.4 Replacing the photoconductor drum >>> page 169
• 5.10.2.5 Replacing the fuser roller >>> page 170
5.10.2.1 Start conversion
Proceed as follows:
1. The first step is preselected under "Worksteps":
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
1 of 2
To Next Page
Loading...
