Oce VarioStream 7000 SINGLE - Settings on the Tension Roller Unit or on the Stacker; Settings on the Tension Roller Unit; Settings on the Stacker

5.6.2 Settings on the tension roller unit or on the stacker
122 A29246-X20-X-4-7680 / fa505.fm
5.6.2 Settings on the tension roller unit or on the stacker
5.6.2.1 Settings on the tension roller unit
5.6.2.2 Settings on the stacker
Proceed as follows:
1. Set the lever for the contact force of
the tension rollers to NORMAL.
• The MAX position can be better for
very heavy special papers.
• The MIN position can be better for
lighter papers.
• The OFF position can be used to
remedy a paper jam.
Proceed as follows:
1. Use the turning knob to position the
format marking to the value of the
inserted paper format length (fold
length).
1 of 3