7.3.4 Replacing corotrons
A29246-X20-X-4-7680 / fa702.fm 269
7.3.4 Replacing corotrons
The printer detects the end of the corotron's service life automatically and displays a
warning on the operator panel.
7.3.4.1 Preparing corotron replacement >>> page 270
Important
When replacing the corotrons, observe the following safety directives:
• Corotrons can only be replaced when printing is stopped.
• Corotrons may only be used for the purpose for which they were originally intended.
• If the corotron had only a short service life, the cause of the problem must be
identified in order to prevent further damage.
• When replacing a corotron, always wear the gloves provided.
Ensure that you do not touch or damage the corotron wires.
Expendable See section
Prepare corotron replacement 7.3.4.1 Preparing corotron replacement >>>
page 270
Replace transfer corotron 7.3.4.2 Replacing the transfer corotron
(1 cartridge) (pinfed) >>> page 271
Transfer corotron wire is torn
7.3.4.2 Replacing the transfer corotron
(1 cartridge) (pinfed) >>> page 271
Replace charge corotrons 7.3.4.4 Replacing charge corotrons (5
cartridges) >>> page 278
Charge corotron wire is torn 7.3.4.5 Replacing charge corotrons (torn wire)
>>> page 281
Replace discharge corotrons 7.3.4.6 Replacing discharge corotrons (2
cartridges) >>> page 284
Discharge corotron wire is torn 7.3.4.7 Replacing the discharge corotron (torn
wire) >>> page 287
Complete corotron replacement 7.3.4.8 Complete corotron replacement >>>
page 290
To Next Page
Loading...
